Xerox
®
Color C60/C70 Printer
2
Simple Image Quality Adjustment (SIQA) Quick Use Guide
Adjust Image Transfer
You must perform this adjustment for each paper type loaded in the
printer.
1.
Log-in as a System Administrator and access the SIQA tools screen.
2.
Touch
Adjust Image Transfer
.
3.
Touch
Paper Type
, and choose a paper type from the list.
4.
Touch
Close
.
5.
Load the selected paper type into Tray 5 (bypass).
Acceptable paper sizes:
•
11 x 17 in.
•
8.5 x 11 in.
•
A3
•
A4
•
SRA3
6.
Touch
Print Sample
.
7.
Select a paper size.
8.
Select
1 Sided
or
2 Sided
for the calibration chart.
9.
Press the
Start
button on the control panel to print the calibration
chart.
10.
Touch
Confirm
.
11.
Touch
Close
.
12.
Touch
Scan Calibration Chart
.
Note
If you printed a 2-sided sample, scan both sides.
13.
Follow the instructions on the control panel touch screen to complete
the calibration.
14.
Touch
Confirm
to exit the scan.
15.
View the adjustment numbers for
Side 1
and
Side 2
.
16.
Touch
Adjust
to complete and save the calibration.
17.
Touch
Close
twice to exit the SIQA tool.
18.
To log out of Admin mode, select the Admin icon on the top right of
the screen and touch
Logout
.
Auto Alignment Adjustment
1.
Print a duplex copy of the Black Paper PDF file that corresponds to the
paper size used in your region. The PDF files are located on
www.xerox.com/support
under the Color C60/C70 Printer
documentation.
•
11 x 17 in.: SIQA Black Paper for Adjustment-Tabloid.pdf
•
A3: SIQA Black Paper for Adjustment-A3.pdf
2.
Log-in as a System Administrator and access the SIQA tools screen.
3.
Touch
Alignment Adjustment
.
4.
Touch
Auto Alignment Adjustment
.
5.
Touch
Print Calibration Chart
.
6.
Select a paper tray with 11 x 17 in. or A3 size paper.
7.
Set the value for
Coverage 1
and
Coverage 2
to 1.
8.
Touch
to print the calibration chart.
9.
Touch
Confirm
.
10.
Touch
Document Feeder Scan Precision Adjustment
.
11.
Follow the instructions on the control panel touch screen to complete
the scan using the Document Feeder and Document Glass.
a)
Position the Black Paper and Calibration Chart as shown on the
Black Paper.
b)
Reposition the Calibration Chart as indicated on the control panel
touch screen and Black Paper and then touch
Scan
for each scan.
c)
After all scans are completed, touch
Start
.
12.
Touch
Confirm
.
13.
Touch
Print Calibration Chart
.
14.
Select a paper tray with the correct paper size.
15.
Select a coverage value for
Coverage 1
and
Coverage 2
using the
table below as a guide.
