Xerox Color 1000 PressColor 800i Press, Руководство системного администратора, Страница: 70 / 78

A Test Print status button is displayed while the print process occurs.
Upon completion of the test prints, the following window appears:
14. Select either:
a) Done Adjusting: Select this if the output meets customer satisfaction.
This closes the current window and returns you to the main Fold Adjustment
window. The new/edited fold adjustment profile is displayed in the Fold Adjustment
window.
b) Continue Adjusting: Select this if the output does not meet customer satisfaction
and requires further adjusting.
This returns you to the The Fold Adjustment - Test Print window where you can
make further adjustments and run additional test prints. Repeat this step as
required until the desired output is achieved. The new/edited fold adjustment
profile is displayed in the Fold Adjustment window.
15. Select Close to exit Profiles and return to the main UI.
16. Select Logoff to exit the Administrator mode.
Related Topics:
Logging on as Administrator
New/edit z-fold half-sheet adjustment procedure
The following procedure provides the basic steps required for creating a new or editing
an existing z-fold half-sheet adjustment profile.
Note
The Fold Adjustment feature is available only when the Standard Finisher, Booklet Maker
Finisher, or Standard Finisher Plus is attached to your machine.
1. Logon as Administrator.
Xerox ® Color 800i/1000i Presses Xerox ® Color 800/1000 Presses 6-20
System Administration Guide
Profiles