Xerox CiPress 325, Информация для помощи клиентам

Страница: 140 / 192

Web wrinkle or damage is defined as the web having nicks, tears, creases, folds, curled
edges or wrinkles.
Possible causes of this IQ defect include:
• Paper width set incorrectly.
• High area coverage on at least one side of the web.
To solve this issue, perform these steps.
1. Verify that the print line is set correctly.
2. Check for excessive offset between where the web enters the Infeed Module near
the s-wrap and after the Web Registration Module. The offset should not be more
than 8 mm between the two points.
Note
See the Web Threading Guide for more information on web setup.
3. Slow advance the web to diagnose where the issue is occurring in the web path.
4. Take corrective action and contact Xerox for assistance if required.
Related Topics:
Image Quality Defect Diagnosis Section
Color Non-uniformity (From Two CiPress
™
Printers)
Ensure that you have read the Image Quality Overview and followed the Image Quality
Defect Initial Actions prior to problem solving this particular image quality defect.
Color non-uniformity (from two CiPress™ Printers) is defined as color density being
inconsistent from printer to printer (from the front side to the back side of the web) with
the area of inconsistency lacking a defined edge.
Use the following procedure to problem solve color non-uniformity (from two CiPress™
Printers).
Perform DC 142 Color Maintenance to problem solve color non-uniformity (from two
CiPress™ Printers).
Related Topics:
Image Quality Defect Diagnosis Section
Xerox
®
CiPress™ 325 / 500 Production Inkjet System
5-38
Customer Help Information
Problem Solving