Xerox C410, Руководство пользователя

Страница: 75 / 262

2. Copy the eight-digit WPS PIN.
3. Open a web browser, and then type the IP address of your access point in the address field.
• To know the IP address, see the documentation that came with your access point.
• If you are using a proxy server, then temporarily disable it to load the web page correctly.
4. Access the WPS settings. For more information, see the documentation that came with your access point.
5. Enter the eight-digit PIN, and then save the changes.
C O N F I G U R I N G W I – F I D I R E C T
Wi-Fi Direct is a Wi-Fi-based peer-to-peer technology that allows wireless devices to connect directly to a Wi-Fi
Direct-enabled printer without using an access point (wireless router).
1. From the home screen, touch SSeettttiinnggss >> N Neettw woorrkk//PPoorrttss >> W Wii--FFii D Diirreecctt.
2. Configure the settings.
• Enable Wi-Fi Direct: Enables the printer to broadcast its own Wi-Fi Direct network.
• Wi-Fi Direct Name: Assigns a name for the Wi-Fi Direct network.
• Wi-Fi Direct Password: Assigns the password for negotiating the wireless security when using the peer-to-
peer connection.
• Show Password on Setup Page: Shows the password on the Network Setup Page.
• Auto-Accept Push Button Requests: Lets the printer accept connection requests automatically.
Note: Accepting push-button requests automatically is not secured.
• By default, the Wi-Fi Direct network password is not visible on the printer display. To show the password,
enable the password peek icon. From the control panel, navigate to SSeettttiinnggss >> SSeeccuurriittyy >> M Miisscceellllaanneeoouuss >>
EEnnaabbllee PPaassssw woorrdd//PPIIN N RReevveeaall.
• To know the password of the Wi-Fi Direct network without showing it on the printer display, from the
control panel navigate to SSeettttiinnggss >> RReeppoorrttss >> N Neettw woorrkk >> N Neettw woorrkk SSeettuupp PPaaggee.
C O N N E C T I N G A M O B I L E D E V I C E TO T H E P R I N T E R
Before connecting your mobile device, make sure that Wi-Fi Direct has been configured. For more information, refer
to
Configuring Wi–Fi Direct .
Connecting Using Wi–Fi Direct for Android Mobile Devices
Note: These instructions apply only to Android mobile devices.
1. From the mobile device, go to the settings menu.
2. Enable W Wii--FFii, and then tap W Wii--FFii D Diirreecctt.
3. Select the printer Wi-Fi Direct name.
4. Confirm the connection on the printer control panel.
Xerox
®
C410 Color Printer User Guide
75
Set up, Install, and Configure