manualshive.com logo in svg

Xerox C3000, Руководство по факсимильной связи

Поделиться
Скачать
Xerox C3000 Скачать руководство пользователя страница 158

Reception

148

3

Reference

p.49 “Resolution”
p.148 “Memory Reception”
p.149 “Substitute Reception”
p.163 “Printing Options”

Memory Reception

The machine waits until all pages of the document have been received into mem-
ory before printing it.

Important

❒

About one hour after the machine is turned off, all fax documents stored in
memory are lost. If any documents are lost in this way, a Power Failure Re-
port is automatically printed when the operation switch is turned on. Use this
report to identify lost documents. See “Troubleshooting When Using the Fac-
simile Function”, Troubleshooting.

❒

The machine may not be able to receive large numbers of documents or doc-
uments with high data content. In such cases, it is recommended that you
switch off multi-copy and 2 sided printing, or install the optional expansion
memory.

❒

The machine may not be able to receive fax documents when free memory
space is low.

❒

If free memory reaches 0% during Memory Reception, any further reception
becomes impossible and the current communication is terminated.

Note

❒

Normally this machine receives documents by Immediate Reception. But
Memory Reception is used when “Multi-copy Reception” or “2 Sided Print”
is set to on.

❒

If you have selected Store for Reception File Setting, received document is
saved on the hard disk and will not be printed. You can print those docu-
ments by operating the machine or a connected computer, as necessary.

Содержание C3000











































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды