3.
Choose one of the following:
• Click
Check for updates > I agree, start update
.
• Upload the flash file. To upload the flash file, perform the
following steps.
To get the latest firmware, go to
, and search for
your printer model.
1. Browse to the flash file.
Note:
Make sure that you have extracted the firmware
zip file.
2. Click
Upload > Start
.
C
Coonnffiigguurriinngg W
Wii--FFii D
Diirreecctt
Wi-Fi Direct
®
is a Wi-Fi-based peer-to-peer technology that allows
wireless devices to connect directly to a Wi-Fi Direct-enabled printer
without using an access point (wireless router).
1.
From the control panel, navigate to:
Settings > OK > Network/Ports > OK > Wi-Fi Direct > OK
2.
Configure the settings.
•
Enable Wi-Fi Direct
—Enables the printer to broadcast its own
Wi-Fi Direct network.
•
Wi-Fi Direct Name
—Assigns a name for the Wi-Fi Direct
network.
•
Wi-Fi Direct Password
—Assigns the password for negotiating
the wireless security when using the peer-to-peer connection.
•
Show Password on Setup Page
—Shows the password on the
Network Setup Page.
•
Auto-Accept Push Button Requests
—Lets the printer accept
connection requests automatically.
Note:
Accepting push-button requests automatically is
not secured.
C
Coonnnneeccttiinngg aa M
Moobbiillee D
Deevviiccee ttoo tthhee PPrriinntteerr
Before connecting your mobile device, make sure that Wi-Fi Direct has
been configured. For more information, see
C
Coonnnneeccttiinngg U
Ussiinngg W
Wii--FFii D
Diirreecctt
Note:
These instructions apply only to Android mobile
devices.
1.
From the mobile device, go to the settings menu.
2.
Enable
Wi-Fi
, and then tap
Wi-Fi Direct
.
3.
Select the printer Wi-Fi Direct name.
4.
Confirm the connection on the printer control panel.
C
Coonnnneeccttiinngg U
Ussiinngg W
Wii--FFii
1.
From the mobile device, go to the settings menu.
2.
Tap
Wi-Fi
, and then select the printer Wi-Fi Direct name.
Note:
The string DIRECT-xy, where x and y are two random
characters, is added before the Wi-Fi Direct name.
3.
Enter the Wi-Fi Direct password.
C
Coonnnneeccttiinngg tthhee PPrriinntteerr ttoo aa W
Wii--FFii N
Neettw
woorrkk
Make sure that Active Adapter is set to Auto. From the control panel,
navigate to
Tools > Network/Ports > OK > Network Overview > OK >
Active Adapter > OK > Auto > OK
Clearing Jams
A
Avvooiiddiinngg jjaam
mss
LLooaadd PPaappeerr PPrrooppeerrllyy
• Make sure that the paper lies flat in the tray.
Correct loading of paper
Incorrect loading of paper
• Do not load or remove a tray while the printer is printing.
• Do not load too much paper. Make sure that the stack height is
below the maximum paper fill indicator.
• Do not slide paper into the tray. Load paper as shown in the
illustration.
• Make sure that the paper guides are positioned correctly and are
not pressing tightly against the paper or envelopes.
• For two-sided printing on A4-size paper, make sure that the paper
size setting in the duplex unit is set to A4.
• For two-sided printing on letter-, legal-, Oficio-, or folio-size paper,
make sure that the paper size setting in the duplex unit is set to
Letter.
• Push the tray firmly into the printer after loading paper.
U
Ussee RReeccoom
mm
meennddeedd PPaappeerr
• Use only recommended paper or specialty media.
• Do not load paper that is wrinkled, creased, damp, bent, or curled.
• Flex, fan, and align the paper edges before loading.
• Do not use paper that has been cut or trimmed by hand.
• Do not mix paper sizes, weights, or types in the same tray.
• Make sure that the paper size and type are set correctly on the
computer or printer control panel.
• Store paper according to manufacturer recommendations.
4