Xerox B225, Краткое руководство пользователя

Страница: 1 / 16

Xerox
®
B225/B235 Multifunction
Printer Quick Reference Guide
Copy
M Maakkiinngg C Cooppiieess
1. Load an original document into the ADF tray or on the scanner
glass.
Note: To avoid a cropped image, make sure that the original
document and the output have the same paper size.
2. From the control panel, navigate to:
> Copy > specify the number of copies
For non-touch-screen printer models, press to navigate
through the settings.
If necessary, adjust the settings.
3. Copy the document.
Note: To make a quick copy, from the control panel, press
.
C Cooppyyiinngg oonn B Bootthh SSiiddeess ooff tthhee PPaappeerr
1. Load an original document into the ADF tray or on the scanner
glass.
2. From the control panel, navigate to:
> Copy > Sides
For non-touch-screen printer models, press to navigate
through the settings.
3. Adjust the setting.
4. Copy the document.
C Cooppyyiinngg m muullttiippllee ppaaggeess oonnttoo aa ssiinnggllee sshheeeett
1. Load an original document into the ADF tray or on the scanner
glass.
2. From the control panel, navigate to:
> Copy > Pages per Side
For non-touch-screen printer models, press to navigate
through the settings.
3. Adjust the settings.
4. Copy the document.
Email
C Coonnffiigguurriinngg tthhee EEm maaiill SSM MTTPP SSeettttiinnggss
Configure the Simple Mail Transfer Protocol (SMTP) settings to send a
scanned document through e-mail. The settings vary with each
service provider. For more information, refer to
Email Service
Providers .
Before you begin, make sure that the printer is connected to a
network and that the network is connected to the Internet.
U Ussiinngg tthhee EEm maaiill SSeettuupp W Wiizzaarrdd iinn tthhee PPrriinntteerr
• Before using the wizard, make sure that the printer firmware is
updated. For more information, see Updating Firmware .
• For non-touch-screen printer models, press OK to navigate through
the settings.
1. From the home screen, touch E-mail .
2. Touch Set up now , and then type your e-mail address.
3. Type the password.
• Depending on your e-mail service provider, type your account
password, app password, or authentication password. For
more information on the password, refer to
Email Service
Providers , and then look for Device Password.
• If your provider is not listed, then contact your provider and
ask for the Primary SMTP Gateway, Primary SMTP Gateway
Port, Use SSL/TLS, and SMTP Server Authentication settings.
4. Touch OK .
U Ussiinngg tthhee SSeettttiinnggss M Meennuu iinn tthhee PPrriinntteerr
1. From the home screen, touch Settings > E-mail > E-mail Setup .
2. Configure the settings.
• For more information on the password, refer to Email Service
Providers .
• For e-mail service providers that are not on the list, contact
your provider and ask for the settings.
• For non-touch-screen printer models, press OK to navigate
through the settings.
U Ussiinngg tthhee EEm mbbeeddddeedd W Weebb SSeerrvveerr
1. Open a web browser, and then type the printer IP address in the
address field.
a. To view the printer IP address, go to the printer home screen.
The IP address appears as four sets of numbers separated by
periods, such as 123.123.123.123.
b. If you are using a proxy server, then temporarily disable it to
load the web page correctly.
2. Click Settings > E-mail .
3. From the E-mail Setup section, configure the settings.
4. Click Save .
a. For more information on the password, refer to Email Service
Providers .
b. For e-mail service providers that are not on the list, contact
your provider and ask for the settings.
EEm maaiill SSeerrvviiccee PPrroovviiddeerrss
To determine the SMTP settings of your email service provider, use the
following tables.
1