Back to Previous Page
34
Connect the printer to the network router with an
Ethernet cord and configure the printer for a
wired connection. (Wi-Fi is on by default and
needs to be turned off.)
Perform these steps from the printer’s control panel.
1.
Press the
System Information
/
Machine Status
button
2.
Use the
Down
arrow and
OK
button to follow this navigation pathway:
Network
>
Wi-Fi > Wi-Fi ON
.
3.
Change Wi-Fi ON to
Wi-Fi OFF
then press
OK
. Press the back button.
4.
Select
DHCP
to have the router assign a dynamic IP address, then press
OK.
5.
Press the
System Information/ Machine Status
button to return home.
Add the Printer to the Network with an Ethernet Cord
Next
Back to Start
