Advanced Features and Troubleshooting Manual
48
Troubleshooting
Indicator light problems
Status indicator light is off
The printer is turned off, not ready, disabled, or has detected an error.
■
Make sure that the printer is plugged in and turned on.
■
Do not plug the printer’s power cord into a power strip; use a grounded wall outlet.
Status indicator light is blinking green
■
If the printer is receiving, processing, or printing a job, wait for the job to be
completed or cancel the job.
■
If you have entered the menu in the front panel, you can exit the menu.
■
If the warm-up sequence has not finished, wait until the printer displays
Ready to Print
.
Status indicator light is blinking yellow
■
The printer is still printing but there is a warning condition that needs user attention
soon.
Status indicator light is blinking red
■
The printer has stopped because it detected an error or condition that required user
intervention, for example, an open door or a paper jam. Correct the condition reported
on the front panel (in the example, you would close the door or clear the paper jam).
■
Press the
Information
key to access more information on the error condition.
■
Refer to the following pages for information about particular error conditions. For
detailed information about jams, refer to the
Phaser 8200 Color Printer User Guide
.