Printer Options 2-9
Reference Guide 8142/8160
Printer Options
Introduction Printer Options Menu Tree Technical Info Error Messages Troubleshooting
2
Choosing paper options
Paper options let you define the following:
•
Supply Type
•
Media Standard
•
Margins
•
Auto-Load Delay
•
Save Media
•
Auto Cut
Supply type
This setting allows you to select your supply options. The available options are
Sheet
,
Roll
,
Roll2
or
Takeup
.
Select
Sheet
if you intend to use cut sheet stock. Select
Roll
if you are going to use roll paper on the upper roll
feeder. Select
Roll2
if you are going to use roll paper with the lower roll feeder. (No takeup available with either
roll option.) Select
Takeup
if you intend to use roll paper with the takeup system.
To choose supply type
1
Press
Setup Menu/Paper Option Menu/Supply Type
.
2
Choose the supply type.
3
Press
OK
.
Media standard
When you create an image, you determine its size at the computer. It's important that you know the size of the
image and load the appropriate size media because the printer automatically defines the print area based on the
loaded media's width. Be sure that the media you load is wide enough to accommodate the image. If extra length
is required, use roll media. If the media is smaller than the image, the image may be truncated. Minimum media
width is 11".
