Xerox 770, Руководство по безопасности

Страница: 6 / 24

WARNING
Shielded cables must be used with this equipment to maintain compliance with FCC
regulations.
In Canada (ICES-003)
This Class “A” digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe “A” est conforme à la norme NMB-003 du Canada.
Regulatory information for RFID
This product generates 13.56 MHz using an Inductive Loop System as a Radio Frequency
Identification system device (RFID). This RFID device complies with the requirements
specified in FCC Part 15, Industry Canada RSS-210, European Council Directive 99/5/EC,
and all applicable local laws and regulations.
Operation of this device is subject to the following two conditions: 1) this device may
not cause harmful interference, and 2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications to this equipment not specifically approved by Xerox
Corporation may void the user’s authority to operate this equipment.
Safety extra low voltage approval
This Xerox product is in compliance with various governmental agencies and national
safety regulations. All system ports meet the Safety Extra Low Voltage (SELV) circuits
for connection to customer-owned devices and networks. Additions of customer-owned
or third-party accessories that are attached to the machine must meet or exceed the
requirements previously listed. All modules that require external connection must be
installed per the installation procedure.
Product safety certification
This product is certified by the following Agency using the Safety standards listed below.
Standard Agency
CAN/CSA-C22.2 No. 60950-1-07, UL 60950-1,
Second Edition CSA International
IEC60950-1, Second Edition NEMKO
Xerox
®
770 Digital Color Press
1-2
Safety Guide
Notices and certifications