Xerox 7500/DN - Phaser Color LED Printer, Руководство пользователя, Страница: 30 / 164

Network Basics
Phaser 7500 Color Printer
User Guide 30
Automatically Setting the Printer’s IP Address
If the printer is connected to a small established TCP/IP network without a DHCP server, use the
installer on the
Software and Documentation CD-ROM to detect or assign an IP address to your printer.
For further instructions, insert the Software and Documentation CD-ROM into your computer’s CD-ROM
drive. After the Xerox Installer launches, follow the prompts for installation.
Note: For the automatic installer to function, the printer must be connected to an established
TCP/IP network.
Dynamic Methods of Setting the Printer’s IP Address
There are two protocols available for dynamically setting the printer’s IP address:
• DHCP (enabled by default on all Phaser printers)
• AutoIP
You can turn on/off both protocols using the control panel, or use CentreWare IS to turn on/off DHCP.
Note: You can view the printer’s IP address at any time. On the control panel, select
Information
,
press the
OK
button, select
Printer Identification
, then press the
OK
button.
Using the Control Panel
To turn on/off either the DHCP or AutoIP protocol:
1. On the control panel, select
Printer Setup
>
Connection Setup
>
Network Setup
>
TCP/IPv4
Setup
, then press the
OK
button.
2. Select
DHCP/BOOTP
or
AutoIP
.
3. Press the
OK
button to turn the selection
On
or
Off
.
Using CentreWare IS
To turn on/off the DHCP protocol:
1. Launch your Web browser.
2. Enter the printer’s IP address in the browser’s
Address
field.
3. Select
Properties
.
4. Select the
Protocols
folder on the left navigation panel.
5. Select
TCP/IP
.
6. Click the
TCP/IP (v4)
button.
7. In the BOOTP/DHCP Settings section, set the
BOOTP/DHCP
option to
On
or
Off
.
8. In the TCP/IP Settings section, enter the static IP address which may be different than the DHCP or
auto IP address listed. Check that the Network Mask and Router/Gateway address are correct for
your network.
9. Click the
Save Changes
button.