Xerox 701P91273, Руководство по установке

Страница: 33 / 52

XPrint UNIX SYSTEM PRINTER DRIVER INSTALLATION 13-7
To Use Telnet:
At any Telnet client (UNIX, WFW3.11, NT, DOS, ...) Telnet to port 2002 of the 49XX.
NOTE: Telnet will work only if the TCP/IP protocol stack is loaded AND it supports Telnet.
NOTE: In the following examples, the expression XXX.XXX.XXX.XXX refers to the IP address
of your XPrint printer. See Appendix A to obtain PRINT SETTINGS page for review of
your printer’s IP address. If necessary, see Appendix B to set your printer’s IP
address.
Starting TELNET from UNIX:
At the Command prompt TYPE:
telnet XXX.XXX.XXX.XXX 2002 [ENTER]
Starting TELNET from WINDOWS NT:
At the Command prompt TYPE: telnet XXX.XXX.XXX.XXX 2002 [ENTER]
Starting TELNET from WFW3.11 (with Microsoft’s win32s TCPIP stack):
At the Command prompt TYPE: telnet XXX.XXX.XXX.XXX 2002 [ENTER]
The Telnet Console Main Menu:
At the Command prompt TYPE: telnet XXX.XXX.XXX.XXX 2002 [ENTER]
The system will attempt to connect to the host. You will see: