Xerox 6250B - Phaser Color Laser Printer, Руководство пользователя, Страница: 7 / 8

Print-Quality Problems
Phaser® 6250 Color Laser Printer
4-18
Calibrate Margins
Use the
Calibrate Margins
menu to adjust the printed area to fit within the edges of the
paper. The imaging area appears as a dashed rectangle; the printer does not print outside this
rectangle.
Adjusting Side 1 Margins
1. At the printer’s front panel, select Troubleshooting , then press the OK button.
2. Select Print Quality Problems , then press the OK button.
3. Select Calibrate Margins , then press the OK button to print the page.
4. To move Side 1 “A” margin:
a. Select Adjust Side 1 “A” Margin , then press the OK button.
b.
Press the Up arrow to move the margin as illustrated.
5.
To move Side 1 “B” margin:
a.
Select
Adjust Side 1 “B” Margin
, then press the OK button.
b. Press the Up arrow to move the margin as illustrated.
You can adjust the settings from -40 to +40 units. The thickness of the rectangle’s dashed line
is 1 unit. 12 units move the rectangle 1 mm. The maximum distance the rectangle can be
moved (-40 to +40) is 6.7 mm.
To move up: increase
the Adjust Side 1 “A”
margin setting. To move down:
decrease Adjust Side 1
“A” margin setting. To move left: decrease
Adjust Side 1 “B” margin
setting. To move right: increase
Adjust Side 1 “B” margin
setting.
Calibrate Margins
B- B+
A+
A-
Calibrate Margins
Calibrate Margins
Calibrate Margins
Phaser
Phaser
Phaser
Phaser