Protocol Control
System Administrator Guide
3-7
TCP/IP
To change TCP/IP settings:
1.
Launch your web browser.
2.
Enter your printer’s IP address in the browser’s
Address
field (http://xxx.xxx.xxx.xxx).
3.
Click
Properties
.
4.
Select the
Protocols
folder on the left navigation panel.
5.
Select
TCP/IP
.
6.
If prompted, enter your Admin or Key User name and password.
7.
In the
BOOTP/DHCP
box, select one of the following:
■
On
: The printer issues BOOTP and DHCP requests on startup.
■
Off
: The printer does not issue BOOTP or DHCP requests on startup.
8.
If you selected
Off
, follow the instructions in the
TCP/IP Settings
section to manually
enter the printer’s TCP/IP information.
■
Enter the TFTP server IP address or hostname in the
TFTP Server Name
field.
■
Enter the pathname of the configuration file in the
Boot File Name
field.
9.
Under
DDNS/WINS Settings
, in the
DDNS
box, select one of the following:
■
On
: The printer registers its IP name and address so other devices on the network can
refer to it by name.
■
Off
: The printer does not register its IP name and address. If
DDNS
is
Off
, these
values may be set by
BOOTP/DHCP
if enabled.
10.
If you selected
On
, follow the instructions in
DDNS/WINS Settings
to manually enter
settings to identify the printer. For more information, including a description of the fields,
click the
Help
button in CentreWare IS to view the online help.
11.
Click the
Save Changes
button.
Port 9100
The Port 9100 protocol is also known as AppSocket, RAW, or Windows TCPmon.
To change Port 9100 settings:
1.
Launch your web browser.
2.
Enter your printer’s IP address in the browser’s
Address
field (http://xxx.xxx.xxx.xxx).
3.
Click
Properties
.
4.
Select the
Protocols
folder on the left navigation panel.
5.
Select
Port 9100
.
6.
If prompted, enter your Admin or Key User name and password.
7.
Select
On
or
Off
in the
Port 9100
box.
8.
If you selected
On
, follow the instructions on the page to select Port 9100 settings. For
more information, including a description of the fields, click the
Help
button in
CentreWare IS to view the online help.
9.
Click the
Save Changes
button.
