12
Phaser 3400 Personal Laser Printer
EtherTalk Configuration
If the Configuration Sheet shows the correct printer name and zone but the printer is still
not visible in the
Chooser
, check the following items:
■
1. If there is a Novell NetWare server on the network, verify that the NetWare
server has been configured for AppleTalk Phase 2 routing and addressing.
■
If there is a Windows NT server on the network, verify that the printer has not
been captured by a Windows NT machine.
■
If the printer continually reboots when connected to the network, it is possible
that a router is broadcasting a zone of *, which is an invalid zone.
Changing the printer's name
The printer's name is displayed on the Configuration Sheet. The printer's default name is
Xer0000f0axxxxx
(with
x
representing a hexadecimal number). The name also appears in
the
Chooser
. The name can be up to 31 characters long. It may contain any printable
characters; however, the characters @ : = * are deleted from the name used on AppleTalk.
A change is persistent across printer power cycles.
You can change the printer name by using the Phaser 3400 web server:
1.
Open the Internet Explorer web browser (version 4.0 or higher).
2.
For the
Address
, type
http://
, then the IP address of the Phaser 3400 printer, then
press the
Enter
key. For example, if the IP address is 192.25.26.81, type:
http://192.25.26.81
3.
On the main page, click the
Admin
button, then select
AppleTalk
.
4.
If desired, change the printer name and description.
5.
Click the
Apply
button.
Changing the printer's EtherTalk zone
You can use the Phaser 3400 web server to change the EtherTalk zone:
1.
Open the Internet Explorer web browser (version 4.0 or higher).
2.
For the
Address
, type
http://
, then the IP address of the Phaser 3400 printer, then
press the
Enter
key. For example, if the IP address is 192.25.26.81, type:
http://192.25.26.81
3.
On the main page, click the
Admin
button, then select
AppleTalk
.
4.
The
ZIP
item enables you to change the current EtherTalk Zone.
5.
Click the
Apply
button.
