Xerox 2101, Руководство по настройке

Страница: 48 / 192

3
3-4 Preparing for Fiery EX2101 Setup
Guest privileges (no password)
No password is needed for a user to log in as a Guest from the job management tools.
A Guest can view the status of active jobs but cannot make changes to jobs or to the
Fiery EX2101 state.
Fiery WebTools
The Fiery EX2101 can support Internet or intranet access from Windows and Mac OS
computers with Fiery WebTools. To enable use of Fiery WebTools, you must do the
following in Setup:
• Enable TCP/IP.
• Set an IP address, subnet mask, and gateway address for the Fiery EX2101.
• Enable Web Services.
For more information, see Chapter 6 .
N
OTE
:
Fiery WebTools are not supported on Mac OS X.
You can set passwords to control access to Fiery WebTools features. If you do not
specifically set these passwords, all users have access to all Fiery WebTools functions
(see
“Passwords” on page 3-3). Fiery WebTools include Status
™
, WebLink
™
,
WebDownloader
™
, WebSetup, WebSpooler
™
, and Installer
™
.
Status
The Status WebTool provides you with current information on the jobs processing and
printing on the Fiery EX2101. It is not affected by passwords. For more information,
see the
Printing Guide .
WebLink
WebLink provides all users with a link to an address on the Internet. To change the
WebLink Internet address, see
“Setting the WebLink destination” on page 6-3. This
function requires the Administrator password, if one has been set (see “Passwords” on
page 3-3).
N
OTE
:
If you do not set the Administrator password, any user can change the WebLink
address, which affects all users. For this reason, we strongly recommend that you set an
Administrator password.