Xerox 2101, Руководство по настройке

Страница: 168 / 192

7
7-14 Administering the Fiery EX2101
Installing a ZIP drive for Font Archiving
To use the Fiery EX2101 Font Archiving feature, you must connect a USB compatible
external ZIP drive to the Fiery EX2101. Connect the power cable to your ZIP drive,
and the USB cable to your ZIP drive and to one of the USB connectors on the back
panel of the Fiery EX2101. For the location of the USB connectors, see
“Back view of
the Fiery EX2101” on page 1-10. It is not necessary to install the device driver; it is
included in your Fiery EX2101.
N
OTE
:
If your ZIP drive is USB 2.0 compatible, a warning message is displayed on the
FACI.
Insert a ZIP disk. Now you are ready for Font Archiving (see “Font Archiving” on
page 4-47).
Starting and shutting down the Fiery EX2101
Generally, you can leave the Fiery EX2101 running all the time. This section describes
how to shut down and restart the Fiery EX2101 when necessary.
Starting the Fiery EX2101
To start the Fiery EX2101, move the power switch on the back of the Fiery EX2101 to
the On position. If the copier is also turned off, turn it on before turning on
the
Fiery EX2101.
To access the FACI, if installed, you must enter the user name and the password at the
FACI. The user name is
Administrator
, and the default password is “
Fiery.1
”.
To turn the Fiery EX2101 back on after you turned it off, wait at least 10 seconds.
Hide FieryBar
Hides FieryBar. To show FieryBar after hiding it, right-
click the Fiery icon on the right side of the Windows
taskbar and choose Show FieryBar from the menu that
appears.
!