22. Copy Features
Xerox DocuColor 2006
22–19
Advanced Features
The Advanced Features
option includes the following:
•
Output
–
to change the tray that your copies output to. The option can be
set to either the Exit Tray, the left-hand side output tray, or the Top Tray,
the tray above the printer where print jobs are output.
•
If the Sorter/Stacker option is attached, there are other output selections
available. Refer to the section
Determining Output with the optional
Sorter/Stacker
for additional information.
•
Erase
–
to set an erase value from 0 — 50 mm for the following
dimensions on your copy output:
•
Horizontal
•
Vertical
•
Center
The DocuColor 2006 copier/printer automatically creates a 4 mm border on
every copy. This is not an erase feature and can not be deleted.
•
2-Sided
–
to produce double sided output, output with images on both
the front and back sides, from single sided input. The following
orientation options are available for the 2-Sided feature:
•
Portrait – to have to images flip along the long edge of the output.
•
Landscape
– to have the images flip along the short edge of the
output.
•
2
Up
–
to copy two images onto a single page. The following image
positions are available for the 2 Up feature:
•
ON
(L
➙
R)
–
to position the images in order from left to right.
•
ON
(R
➙
L)
–
to position the images in order from right to left.
You can not use the 2 Up
feature with the following:
•
2-Sided
option
•
Auto Paper Supply
option
•
Auto Reduce/Enlarge
option
The 2-Sided
feature and the 2 Up
feature are available only if you have a
Document Feeder.
