Xeos Brizo-X, Руководство по оборудованию

Страница: 4 / 14

3
Overview
The Brizo-X Directional Wave Height Sensor utilizes Global Navigation Satellite System (GNSS) to
measure wave statistics. Since the Brizo-X uses GNSS to calculate its heading, no calibration is
required.
The sensor is housed in a robust enclosure for rough environments and to prevent water ingress.
The sensor runs autonomously and can record data to SD cards, as well as output over RS-232 or
send messages over the Iridium network.
Pin-out Diagrams
The Brizo-X has only one available connection for all physical inputs and outputs. Below are the
standard pinouts that can be requested to be configured at the factory.
Serial Standard
Pin Number Function
1 Serial 2 Transmit
2 Serial 1 Transmit
3 Serial 2 Receive
4 Serial 1 Receive
5 V +
6 Ground
Connector: MCBH-6F-TI (Female), External View
SDI-12 Standard
Pin Number Function
1 SDI-12 Bus
2 Serial 1 Transmit
3 No Connection
4 Serial 1 Receive
5 V +
6 Ground
Connector: MCBH-6F-TI (Female), External View