Kilo User Manual Version 3.0
19
Communicating over USB
The Micro-USB connection at the top of the battery core is used for flash memory dumps and
firmware upgrades through the use of a terminal emulator. Port settings are as follows:
Baud Rate
57.6k
Parity
None
Data Bits
8
Stop Bits
1
When interfacing with the Kilo over USB, batteries should not be installed. As a consequence, the
device will fail its initial self-test. Sending any character to the device will abort the self-test and
end any beeping.
For information on firmware upgrades, see
For more information on flash memory dumps, see
