Xenya VT510, Инструкция по установке и эксплуатации, Страница: 24 / 48

Invoking Desktop Features
Clock feature
You can enable the Clock feature without entering Set-Up by
pressing
Caps Lock Alt F11
if you are not in an ASCII emulation
mode.
The current time is displayed in the status line if this feature
is enabled. The format is HH:MM, followed by AM or PM if the
12-hour format is selected. Use the following keys within the
clock feature:
Key Function
+
or
Tab
Go to next field.
*
or
Shift Tab
Go to previous field.
(
or
)
Move within a field.
Return
or
Enter
If desired, check the 24-hour format
box. For example, before entering
13:00, enable 24-hour format.
A
or
P
For 12-hour format, set the time to
morning by pressing
A
or
P
for
afternoon.
If the clock feature is enabled, then the alarm sounds for five
seconds or until a key is pressed. Each alarm message can be up
to 20 characters and will be displayed in the status line until a
key is pressed. If the hourly chime is enabled, then the terminal
will beep once every hour. In Set-Up, select the Save settings
menu item to save the time format. The clock feature is disabled
when the terminal is turned off.
2–2 Desktop Features