1
Ref: XPSU1208e / XPSU1216e
12V dc 4A/8A Low
Profile CCTV SMPSU
XPSU1208e XPSU1216e
4A: 8 x 0.5A Fused Outputs 8A: 16 x 0.5A Fused Outputs
Thank you for choosing this high quality 12V dc power supply. Before attempting to
connect or operate this product please make sure you carefully read these
instructions for your safety.
General:
A range of 12V dc power supplies capable of delivering fully rated current to load, housed within
a low profile metal enclosure, suitable for internal use only. Provided with 8 or 16 individually
PTC fused outputs ideal for low powered CCTV installations.
I
NSTALLATION AND
S
ET
-U
P
This unit is only suitable for installation as permanently connected equipment and
MUST
be fed from a
mains power source having a separate (approved) disconnect device - fitted with a fuse or other over-
current protection device rated at 3A maximum. Ensure that the disconnect device used has appropriate
earth fault protection to the applicable standard.
The enclosure is
NOT SUITABLE
for external use; bushings should meet a minimum flammability specification
of UL94 HB.
The PSU should be installed according to all relevant safety regulations.
1)
Fix to wall or other support structure using the screws/fixings supplied or use appropriate types for the
surface it is being mounted to.
2)
Mains input cable must be to the applicable standard with a 3A or greater current capacity, having a
minimum operating voltage of 300/500V ac.
3)
The low voltage output cable must be correctly sized to carry the rated load current to the devices
connected to the PSU.
4)
Mains input and low voltage output cables should be routed to use different entry/exit holes in the
enclosure.
5)
To comply with current BS EN60950 safety legislation the supplied cable ties must be used to secure
mains input and low voltage output wiring.
Norbain SD
Tel: +44 (0)118 912 5000
210 Wharfdale Rd,
Fax: +44 (0)118 912 5001
Winnersh Triangle,
Web:
www.vista-cctv.com
Wokingham, Berkshire,
RG41 5TP, UK.
