XENO XPANHDA180A-6MP, Руководство пользователя

Страница: 15 / 33

15
How to access the Camera’s OSD Menus
The camera has three separate sensors, each with its own OSD menu and settings.
When adjusting the camera’s settings, each lens/ sensor will have their own set of values and settings and
will be set separately.
In addition, the camera ofers a 4
th
BNC output of a combined 180˚view as a single camera output. This output
has an additional Panoramic OSD menu with special settings including stitching and motion and patrol setup.
To access each sensor’s OSD menus select one of the following options :
1
The camera has four (4) BNC outputs, each supporting UTC (Up the Coax) communication.
When the camera is connected to a DVR supporting UTC communication like the VMAX A1
TM
, you can access
the camera’s OSD menu directly from the DVR.
2
The camera supports RS485 communication, allowing to control the camera remotely.
3
In the camera’s external control board, there is a switch next to the joystick controller. The switch determins
which of the three (3) sensor will be displayed in the secondary BNC output. When selected, the selected sensor’s
display will appear in the 2nd video out for 60 sec.
Option 3 does not support access to the fourth Panoramic OSD menu. Please use UTC or RS485 cabling to access those options.
UP
OSD Joystick
BNC Selection Switch
L
R
D