NETWORK SETUP
RECORD SETUP
1. Go to the Main Menu and select RECORD.
2. In the record window, select the Record Setup submenu.
3. Choose the desired resolution, frame rate, quality and recording type for
continuous recording. (Continuous)
4. Choose the desired frame rate, quality and recording type for Event recording.
(Event)
5. Individually configure the settings for each channel, or use the [COPY SETTINGS]
button to apply changes to multiple cameras.
6. To setup a specific recording schedule, go to the SCHEDULE submenu. You can
setup the record schedule by applying different recording modes at different
days and times.
a. Select a record mode from the options on the top of the screen.
b. Using your mouse, click, hold, and drag to select multiple days & hours.
c. You can setup a unique recording schedule for each channel or apply the same
recording settings to all channels.
d. You can setup special days as "holidays" either by their date (December 24th)
or by their time of the month (Third Thursday of November).
Recording Configuration
1. In the [Network] menu set “Network Type” to [DHCP] and click [IP DETECT].
2. Once the system generates all the information based on your network requirements,
you can change the Network Type to Static and save all the changes as static.
A static IP address will not be changed by the network. Contact your Internet
Service Provider for additional information.
3. Some internet service providers block port 80 in their customer's routers.
4. Access your router by entering its external IP address in your web browser
(this information can be found by running an ipconfig command on your computer's
Command Prompt. The router's external IP address is the GATEWAY address.)
This step is only necessary if you are planning to connect to your DVR from a
different network, over the internet.
1. Go to the NETWORK menu in the menu window.
Network Setup
1. Check USE DDNS to enable. (Make sure the DVR's web port has been properly
setup in your router).
2. Select joinip2.net (default).
3. Enter a name for your DVR and click the CHECK button. If the name is available
in the server's database, the system will display the following message:
"THIS DVR NAME CAN BE USED". Click SAVE to save all changes.
4. To use your DDNS, open an IE page and enter the DDNS in the address bar:
DVRname.joinip2.net:port-number.
Registering DDNS
Note: The following information is general guidelines. These may vary by network
and router specifications. Contact your installer or ISP for additional info.
Web
The CMS is included with the DVR. Install it on your computer from the accessory
CD. After installation, double-click on the shortcut to launch the software.
(user/ Password: Administrator/ no password)
To Add a site:
1. Right-click on the device list panel and select "Add Site"
2. Make sure HDS or HDL series is selected from the Model drop-down list.
3. Enter your DVR's information:
a. Name
b. IP Address. If you are trying to connect to the DVR from a PC that is in the
same network as your DVR, click "Search" to auto-discover your DVR.
c. TCP Port- will be filled out to Default(80, consecutively).
d. ID and Password- to access the DVR.
e. Channel- enter the span of channels available on your model (ex. 1-8/ 1-16).
4. Press 'OK' to save, or 'Cancel' to delete all changes.
5. To connect to the newly added site, click on the name and drag it into the viewing
area. Select to view Live/ Playback.
CMS (Central Management System)
The “HELP” button will
help you understand how to setup
several important settings such as
DDNS, NOTIFICATION, BACKUP,
SCHEDULE, NETWORK, and
CAMERA. For example, if you need
help about how to set “BACKUP”,
Click “HELP” button at the right
bottom of the BACKUP menu.
Help
Note: If you are using IE, install all Active-X Control notifications to view video from the DVR.
Open an Internet Explorer web page.
To view the DVR's web page using Google
Chrome, please install the "IE Tab" add-on.
After entering the DVR's IP address,
press the add-on's button on the top
right-hand corner of the web viewer to
enable the web viewer to be displayed on
Google Chrome.
Enter the User ID and Password and
click Enter. (Default User/ Password:
admin/ no password).
The DVR's web viewer will be displayed.
The DVR offers a uniquely true DVR health monitoring, with pop-up
messages and e-mail notification on video loss, recording failure, and storage failure.
To setup:
1. Check the box next to "Enable Health Check"
2. Check the box next to the conditions you would like to be notified on.
3. Set the occurrence intervals.
(For Example: when video loss occurs more than 1 time a minute)
4. Select whether to receive a pop-up message when conditions are met.
5. Go to Network Notifications.
6. Under e-mail notifications, make sure the Health Check option is enabled.
When any of the failures occur beyond the set conditions, the system will display a
pop-up alert and send an e-mail notification.
Health Check
CAMERA CONNECTION
Example 1) All TVI 4CHs 1080P/720P
CAMERA CONNECTION
REMOTE CLIENT
joinip2.net
80
AUDIO IN
AUDIO OUT
RISK OF ELECTRIC SHOCK
DO NOT OPEN
2Amax
RS-485 RELAY
ALARM IN
+
C NC NO G 4 3 2 1
-
POWER
TVI 1080P/720P
TVI 1080P/720P
TVI 1080P/720P
TVI 1080P/720P
Example 2) All AHD 4CHs 1080P/720P, Analog 960H
AUDIO IN
AUDIO OUT
RISK OF ELECTRIC SHOCK
DO NOT OPEN
2Amax
RS-485 RELAY
ALARM IN
+
C NC NO G 4 3 2 1
-
POWER
Example 3) All Analog 960H 4CHs
AUDIO IN
AUDIO OUT
RISK OF ELECTRIC SHOCK
DO NOT OPEN
2Amax
RS-485 RELAY
ALARM IN
+
C NC NO G 4 3 2 1
-
POWER
Analog 960H
Analog 960H
Analog 960H
Analog 960H
Example 4) CH 1 : TVI 1080P/720P, CH2 : TVI 1080P/720P
CH 3 : AHD 1080P/720P, CH4 : AHD 1080P/720P or Analog 960H
AUDIO IN
AUDIO OUT
RISK OF ELECTRIC SHOCK
DO NOT OPEN
2Amax
RS-485 RELAY
ALARM IN
+
C NC NO G 4 3 2 1
-
POWER
AHD 1080P/720P,
Analog 960H
AHD 1080P/720P,
Analog 960H
Example 5) CH 1 : AHD 1080P/720P, CH2 : AHD 1080P/720P or Analog 960H
CH 3 : TVI 1080P/720P, CH4 : TVI 1080P/720P
AUDIO IN
AUDIO OUT
RISK OF ELECTRIC SHOCK
DO NOT OPEN
2Amax
RS-485 RELAY
ALARM IN
+
C NC NO G 4 3 2 1
-
POWER
AHD 1080P/720P,
Analog 960H
AHD 1080P/720P,
Analog 960H
5. Check the DHCP settings in your router and setup the DVR for external connections
by performing port forwarding. Contact your Network Administrator and review
the manual for more information. Visit www.portforward.com For additional
information on how to setup port forwarding in your specific router model.
6. Once the router settings have been configured correctly, open an internet explorer
page and enter your router's external IP address:DVR's port number
(Example: http://192.168.0.5). See "Web Viewer" in this QSG for more information.
Note : In order to set TVI or AHD at the same time, the channel combination must be
2 pairs used. (1,2 CH + 3,4 CH + 5,6 CH + 7,8 CH...)
TVI 1080P/720P
TVI 1080P/720P
TVI 1080P/720P
TVI 1080P/720P
AHD 1080P/720P,
Analog 960H
AHD 1080P/720P,
Analog 960H
AHD 1080P/720P,
Analog 960H
AHD 1080P/720P,
Analog 960H
