XENO XDR5, Руководство по установке и эксплуатации

Страница: 154 / 231

154
Xeno XDR5 real time DVRs manual V1.0
Figure 8.7 Sensor Input Setup Interface
3. Select Trigger Channel tab, select one primary channel which will start to record/capture or become full-screen
monitoring when an external alarm is input; Or select one primary channel to start record/capture and 1 to 3
secondary channels become quad view monitoring may with PTZ linkages action when an external alarm is
input;
Note:
Please click “Apply” before going to “PTZ Linking” page.
4. Select Arming Schedule
tab to set the channel’s arming schedule.
Choose one day of a week and Max. eight time periods can be set within each day.
Note: Time periods shall not be repeated or overlapped.
5. Select Handling tab to set up alarm response actions of the alarm input (please refer to Chapter 8.7 ).
Repeat the above steps to set up arming schedule of other days of a week. You can also use Copy button to
copy an arming schedule to other days.
Figure 8.8 Set Arming Schedule of Sensor Input
6. If necessary, select PTZ Linking tab and set PTZ linkage of the sensor input.
Set PTZ linking parameters and press OK to complete the settings of the sensor input.
Note: Please check whether the PTZ or speed dome supports PTZ linkage.
One sensor input can trigger presets, tour or learn tour of more than one channel. But presets, tour and learn
tour are exclusive.