Main Features
Device connection
Common Problems and Troubleshooting
1.Before using the camera ,please read this manual carefully and
keep it safely for later use.
2.Installation should be undertaken by a professional installation
company and follow manufacturer’s instructions, do not disman-
tle.
3.In order to prevent sensor damage, do not expose to intense
light source in long time.
4.Do not touch sensor directly.
5.Please use a dry soft cloth to clean the camera. If the dirt is diffi-
cult to clean, use detergent with water and allow to soak, then
gently wipe off.
6.Do not install camera under air conditioning’s air gate, as this
may allow condensation to form on the lens or bubble.
7.Please ensure during installation and cleaning, power is turned
off.
8.
While storing and transporting, please ensure the conditions are
within the cameras allowable temperature and humidity range.
9.
If for any reason the camera is damaged or does not operate,
please contact your supplier. There are no serviceable parts within.
Any attempt to fix may invalidate the warranty.
Safety instruction
>
Auto Gain Control (AGC)
Built-in auto gain control
(AGC)
circuit. The color camera
can get high definition picture in low light condition.
>
Auto Electronic Shutter (AES)
Built-in auto electronic shutter function. The color
camera’s AES speed can reach
1/100,000
s.
>
OSD button shortcut functions
CVBS
MODE: hold
left
key
5s.
AHD MODE : hold
right
key
5s
.
System switching : hold down
key
5s
.
>
OSD MENU
MAIN
MENU
LENS MANUAL/DC
EXPOSURE
SHUTTER
AUTO,1/30,1/60,FLK,1/240,1/480,1/1000,
1/2000,1/5000,1/10000,1/50000,X2,X4,X6,X8
,X10,X15,X20,X25,X30
AGC
0
－
15
SENS-UP AUTO(X2-X30)/OFF
BRIGHT-
NESS
0-100
D-WDR OFF/ON
DEFOG OFF/AUTO
BACK LIGHT
OFF
BLC:LEVEL/AREA /DEFAULT
HSBLC:SELECT AREA/DISPLAY/BLACK MASK/LEVEL/
MODE/DEFAULT
WHITE BAL.
ATW/AWC
→
SET/INDOOR/OUTDOOR/MANUAL/AWB
DAY &
NIGHT
EXT D
→
N(DELAY)/N
→
D(DELAY)
AUTO
D
→
N(AGC)/D
→
N(DELAY)
/N
→
D(AGC)/N
→
D(DELAY)
COLOR
B/W
BURST/IR SMART/IR PWM
NR
2DNR OFF/LOW/MIDDLE/HIGH
3DNR OFF/LOW/MIDDLE/HIGH
SPECIAL
CAM TITLE
OFF/ON
D-EFFECT FREEZE/MIRROR/NEG.IMAGE
MOTION
SELECT AREA1-4/DISPALY/SENSITIVITY
/COLOR/TRANS/ALARM/DEFAULT
PRIVACY OFF/ON
LANGUAGE
ENG/CHN1/CHN2/GER/FRA/ITA
/SPA/POL/RUS/POR/NED/TUR
DEFECT
LIVE DPC
WHITE DPC
BLACK DPC
RS485
CAM ID:0-255
ID DISPLAY
BAUDRATE:2400/4800/9600/19200/38400
ADJUST
SHARPNESS AUTO/OFF
MONITOR LCD/CRT
LSC OFF/ON
VIDEO.OUT PAL/NTSC
>
No Picture after providing power
Please check: the voltage bening supplied to the camera,
and connections are correctly made.
>
The picture level direction have flowing interference
ripples
May be caused by the power supply AC ripples, may require a
hum rejection transformer.
Check the monitor and peripheral equipments used.
>
The picture background color changes continuously
The fluorescent lamp’s electromagnetic field cause color roll.
This is proper phenomenon of the cameras.
Reduce the fluorescent lamp numbers or increase the
distance between the camera and the fluorescent lamps can
improve it.
Use power supply external sync. camera can solve it.
>
Interference across complete picture
The power supply’s voltage unstable
.
Connecting cables not connect correctly or have high
impedance.
Note
:
• Power supply must pass safety certification ,Its output
voltage, current, voltage polarity and operating temper-
ature must match requirement of this equipment.
• Please install lightning protection devices or cut off the
power in thunder and lightning
conditions.
• To capture high-quality video and pictures, please make
sure the network connection is stable and smooth.
• Please note the camera’s operating temperature and its
using environment
requirement. Avoid using the camera
at too high or too low temperatures. The operating tem-
perature is
-30
~
+
60℃
. (Recommendatory operating tem-
perature is
-10
~
+50℃.)
• Do not mount the camera near by the radiator
or heater.
