XENO 4CH, Руководство пользователя, Страница: 34 / 126

User’s Manual | 34
- NTP Setup - Setup the DVR to automatically sync with a Network Time Protocol.
There are two types of TIME SYNC MODE:
o
Server Mode- The DVR is set as a Time Sync
Server, which can synchronize its own time with
another DVR(s) connected over the same
network environment.
o
Client Mode- The operating DVR is set as the
client DVR. Enter the IP address or URL of
another DVR or Central Monitoring Software
(CMS), as a Time Sync Server in “SYNC
SERVER”. This will cause your DVR to sync its
time with a Time Sync Server in the set interval
time.
-
Display Options
- Set sequence dwell time, pop-up camera, and OSD as indicated below:
o
OSD:

Select which information will be displayed in the OSD visible on each channel in Live .

Select which information will be displayed in the OSD visible on each channel in
Playback
.

Set the OSD’s transparency level, the higher the percentage, the more transpar ent the OSD text
will appear.

Setup a dwell time for the OSD text, after which, the OSD will automatically disappear.

Setup a dwell time for the Setup Menu, after which, the Setup Menu will automatically disappear.
o
Set sequence dwell time- Setup how long the system will display each channel in Sequence mode, before
switching to the next channel.
o
You may select On/Off for Live or Playback status display by checking a check box.
- Screen Saver Setup - See section 3.13 Screen Saver for more information.