HARDWARE CONTENTS
STEP 2
STEP 4
STEP 1
STEP 3
STEP 5
Feed lower end of attachment strap with
two grommets through slot in back plate
from outside to inside. Select inner or outer
slot to best match up with slots in
shoulder pad.
2 Attachment Straps
2 Elastic Hardware Covers
4 T-Nuts
4 Screws
Place elastic hardware cover onto attach-
ment strap.
Feed upper end of attachment strap
through slot in shoulder pad from outside
to inside.
Feed upper end of attachment strap back
through elastic hardware cover
Align the two grommet holes on the lower
end of the attachment strap with one of
the grommet holes from the upper end, and
place a t-nut through the three grommet
holes from back to front. The vertical
position of the pad can be adjusted using
the different grommet holes.
STEP 6
STEP 7
Install screw through front of grommet holes
into t-nut and tighten.
Slide elastic hardware cover over t-nut and
screw. Repeat process from step 1 for
other attachment strap location.
ASSEMBLY INSTRUCTIONS: XENITH SHOULDER PADS
BACK PLATE
BACK PLATE
FRONT
