Xenics Bobcat-640-CL Industrial, Руководство пользователя

Страница: 15 / 24

User Manual
Bobcat-640-GigE&CL Camera
Company confidential.
This document is the property of Xenics. It may not be reproduced – completely or partially – or passed to a third party
without written permission from Xenics.
Xenics nv T +32 16 38 99 00 Doc Ref: ENG-2012-UMN020
Ambachtenlaan 44 F +32 16 38 99 01 Issue: R000.12
BE-3001 Leuven

Belgium www.xenics.com Date: 29/10/2013
XF-104_02/20-01-2012
Page 15 of 24
3. Optical Interface
The optical interface of the camera consists of three parts: the front panel, a lens insert and
the lens itself.
Figure 3-1 Optical components: lens - insert - front
A list of all possible lenses is shown in Table 3-1 .
Lens configuration
Bobcat-640-
GigE & CL
SWIR lens 25mm f/1.4 (Stingray) OPT-000062 x
VIS lens 50mm f/0.95 OPT-000031 x
SWIR lens 50mm f/2.0 + mount/filter holder ASY-000657 x
SWIR lens 75mm f/2.0 + mount/filter holder ASY-000443 x
SWIR lens 100mm f/2.0 + mount/filter holder ASY-000444 x
SWIR lens 200mm f/2.4 + mount/filter holder ASY-000658 x
C-mount extender rings OPT-000119 x
Table 3-1 Lens configuration
It is possible to use the following different solvents to clean a lens:
•
Ethanol: removal of fingerprints and other contaminants
•
Alcohol: final cleaning before use.
Perform the following steps to clean a lens:
1. Immerse lens tissue in Alcohol / Propanol or Ethanol (reagent grade).
2. Wipe the lens in "S" motion in such way that each lens area will not be
wiped more than once!
3. Repeat stage 2 until the lens is clean. Use a new lens tissue each time!
Insert
Front Lens
!