User Manual
Bobcat-640-GigE&CL Camera
Company confidential.
This document is the property of Xenics. It may not be reproduced – completely or partially – or passed to a third party
without written permission from Xenics.
Xenics nv
T +32 16 38 99 00
Doc Ref: ENG-2012-UMN020
Ambachtenlaan 44
F +32 16 38 99 01
Issue: R000.12
BE-3001 Leuven
Belgium
www.xenics.com
Date: 29/10/2013
XF-104_02/20-01-2012
Page 11 of 24
1.5. Safety Warnings
The following safety warnings must be followed:
Supply voltage polarity
: Use the correct polarity of the 12 V supply voltage.
Warranty
: The warranty becomes void in case of unauthorized tampering or any
manipulations not approved by the manufacturer.
Electrostatic discharge
: The camera contains sensitive electronic components
which can be destroyed by means of electrostatic discharge. Use sufficient
grounding to minimize the risk of damage.
Environmental conditions
: Operate the camera in dry and dust free
environment.
Regarding the signal quality of the camera it is an advantage to operate the
camera under constant ambient air temperature (~20°C).
Beneath or above ambient temperature a sufficient heating or cooling may be
necessary.
Warm-up Period
: Depending on the prevailing environmental conditions, some
time might pass after the camera start, until the image quality reaches its
optimum.
1.6. Conformity
Xenics declares under its sole responsibility that all standard cameras of the Bobcat 640
family to which this declaration relates to, are conform with the following standard(s) or other
normative document(s):
•
CE, following the provisions of 2004/108/EG directive
•
RoHS (2002/95/EC).
CE:
We declare, under our sole responsibility, that the previously described Bobcat
cameras
areconform to the CE directives.
i
!
!
!
!
