User Guide: XenData X1500 LTO-5 Archive System
23
The tape is ejected immediately
and Tape FLASHES, Drive
FLASHES on unloading tape.
The tape cartridge
memory (CM) may be
faulty.
Write protect the cartridge by sliding the switch
on the tape cartridge. The tape can be loaded
and the data read. Once the data is recovered,
the cartridge must be discarded.
Drive FLASHES.
The drive mechanism
has detected an error.
Load a new cartridge. If the error persists, power
cycle or reset the drive. If the Drive LED remains
on, call for service.
Drive, Tape and Ready FLASH.
There is a firmware
download problem.
Insert a cartridge to clear the LED sequence. If
the condition persists, call for service.
Drive and Ready ON with Tape
and Clean OFF. Alternates
repeatedly.
The drive has a firmware
error.
Power cycle or reset the drive. Upgrade the
firmware. If the condition persists, call for
service.
