XenData SXL-4200N, Начало работы, Страница: 9 / 18

9 XenData SXL-4200 Getting Started
3. System Power-On and Power-Off Procedures
3.1 Power-On
3.1.1 Power-on the tape library
Power-on the library by depressing the power button on the front of the unit. The library will start to
initialize and the green ready light on the front of the library will start to flash.
3.1.2 Wait until the Library is Ready
Wait until the tape library has completed its inventory process and the ready light shows as steady
green.
3.1.3 Power on the SX-250
Power on the SX-250 archive appliance by pressing the power button on the right side of the front
panel and wait for it to boot up.
3.1.4 Logon
Logon to the SX-250 using the following :
Windows User Name: Administrator
Windows Password: XDpassword1
3.2 Power-Off
3.2.1 Preparation Ensure that all archive and restore operations have completed. Ensure that there are
no LTO cartridges in any of the tape drives in the tape library as indicated by the control panel on
the library. If necessary wait until the drives unload automatically. (The XenData software, by
default, will unload tape cartridges after 10 minutes of inactivity.)
3.2.2 Power-Off SX-250
Power-off the SX-250 archive ser
ver using ‘Shut down’ from the Windows start button. Wait until
the SX-250 completes its power-off sequence.
3.2.3 Power-Off LTO Library
Power-off the LTO library by pressing the power switch on the front of the library.