Xenarc 1020 Series, Руководство по установке

Страница: 12 / 15

12 │ Hardware Installation
3.
ADJUST
• Source Info : Display the source of input signal. If it is ON.
• Resolution Info : Select to turn OFF or turn ON displaying of On Screen
Source Information.
• Source Enable : Select to enable or disable the input signal. If an input
signal is turned off, the source will automatically be disabled.
• KeyPad Enable : Allows you to disable or enable the buttons on the front
of the monitor. Power, Menu, Select, Left, and Right buttons can be
disabled or enabled. ( only operated with remote )
• User Reset : Reset to factory default setting.
4.
Setup
• Smart Light sensor : Enable or disable the auto sensor of surrounding
environment.
─“
On
”
means the monitor can automatically adjust the backlight of the
display according to the surrounding environment.
─
Please note : While smart light sensor is enabled, the option of dimmer or
backlight inside the OSD can not work until smart light sensor is disabled.
• Screen Power Saving : Adjust the time out of the monitor backlight, When
there is no signal input. ( Default is On 10 Sec )
• Left/Right Key : Set front Left/Right buttons as Dimmer or Volume Control.
• Digital Audio Source : Select the audio source while only in HDMI source.
When set to AUTO, the built-in speaker will output the digital audio, if HDMI
source include audio signal. Otherwise, the speaker will output the analog
audio signal from the mini stereo jack marked as “ PC Audio ”
When set to Digital, the built-in speaker will output the digital audio signal
from HDMI.
When set to Analog, the built-in speaker will output the analog audio signal
from the mini stereo jack marked as “ PC Audio ”