17
EVOLVE 2 User Manual V1.2 by XDynamics Limited
ATTACHING AND DETACHING THE PROPELLERS
The EVOLVE 2 aircraft employs a sturdily constructed attach and detach propeller system. With a quick half turn
installation, the aircraft can be ready to fly within minutes of pulling it out of the pack. To detach the propellers, follow the
steps below in reverse. Before installing the props, please make sure that the pre-flight check list is complete.
SEE DIAGRAM FOR ATTACHING AND DETACHING THE PROPELLERS
Step 1
- Ensure that the CW / CCW direction of the propeller is
aligned with the direction of the motor.
Step 2
- Place the propeller on top of the motor, apply a
downward force. Hold the motor still and twist the propeller in
the direction of the arrows shown on its surface.
Step 3
- Continue twisting the propeller with downward force
until the red dot on the propeller and the red lock on the
motor are aligned. Once you release the downward force, the
propeller should pop up and lock securely into place. Confirm
it is secure by twisting the propeller left and right while holding
the motor in place. The propeller should now be firmly secure.
Step 3
Step 2
Step 1
