Product Introduction:
XP-2 is a one kind of portable and advanced decoding headphone
amplifier which integrates USB input, Bluetooth input, line input into it,
which can connect with mobile phone, computer, player and other audio
device by USB/Bluetooth interface to perform digital audio decoding
amplifier. It supports high-definition audio transmission, greatly improve
your sound quality of audio equipment, which can always make you
enjoy the passionate music and have a good mood.
Product Features:
◆
It has USB decoding function, which uses high performance chip
SA9123, works in asynchronous mode and supports 192kHz/24bit
high-definition digital signal at most;
◆
It has Bluetooth wireless receiving function, which can support aptX
high-definition lossless transmission;
◆
It uses high performance DAC chip: AK4452;
◆
It uses OP+BUF circuit framework with high drive ability;
◆
Dual-level gain adjustment is equipped externally, which is suitable for
headphones with different resistances;
◆
The housing is made of high strength aluminum alloy.
Product Parameter:
Bluetooth receiver: Bluetooth 5.0, support AAC, SBC, aptX
USB receiver: Support Android mobile phone with OTG function and
192kHz/24bit lossless transmission at most, computer USB input,
support Win XP, Win7, Win8, Win10 ( it is necessary to install drive),
MAC system.
USB sampling rate: Support 44.1kHz-192 kHz,16 -24 bit
Frequency Response: 10Hz~/- 0.5dB)
Gain: +3/+9dB
THD+N: 0.008% (1kHz)
Output Power: 245mW @32
Ω
