Performing
PAGE/SELECT
You may wish to adjust the sensitivity of the pads according to
your playing style and desired dynamic range.
For details on pad adjustments, refer to
Advanced Use
.
You can switch the click sound on and off by pressing [CLICK]
button. When the click plays at the current Time Signature and
Tempo (displayed in the top left corner of the LCD), the beat
indicators will swing accordingly. You can set the time signature
and interval, adjust the click volume and select the click sound
in the CLICK menu.
Press the [CLICK] button.
Start the metronome with click sound.
Press the [PAGE] button to select the click menu pages
and press the [ ] or [ ] button to adjust the parameters.
Press the [CLICK] button again.
Stop the metronome and exit the click menu.
You can adjust the tempo of the Metronome, the current song,
and the current learning pattern. The current tempo always
displays in the top left corner of the LCD.
Press the [TEMPO] button.
Press the [ ] or [ ] button.
Adjust the current tempo.
Press both [ ] and [ ] buttons at the same time, reset the
current tempo to its default value.
Note:
If there’s no operation, it will return to the previous menu page
automatically after 3 seconds.
UITILY
TEMPO
BEAT
UTILITY
TEMPO
BEAT
CLICK
TEMPO
BEAT
SONG
TEMPO
BEAT
9
1.
2.
3.
1.
2.
3.
1.
2.
3.
4.
Press the [UTILITY] button
The UTILITY indicator appears.
Strike a pad or press a pad select button to select the one
whose sensitivity is to be adjusted. The PAD indicator
shows the current selected pad.
Press the [ ] or [ ] button to adjust the sensitivity.
Press the [SAVE] button to save the current setting.
UTILITY
CLICK
CLICK
TEMPO
SAVE
