background image

Before you use any of the products described in this 

manual, carefully read all the information contained 

herein with comprehension. Becoming familiar with this 

information is a prerequisite for safe and long-term

use of the products described in this document.  

This manual is intended as a guide for correctly trained 

divers, and so a number of matters related to diving are 

described here only roughly. In no way can this manual 

act as a substitute for professional diver training or 

course. Therefore, before you start using any of the prod-

ucts described in this manual, make sure that you have 

relevant qualifications issued by a registered 

 

diving organization.  

If any of the information contained in this manual or  

if any information label placed on the Buoyancy Compen-

sation Device is not clear, contact the manufacturer  

for explanation:

XDEEP Spółka z ograniczoną odpowiedzialnością Sp. k.

Ul.Ogrodników 3, 43-227 Góra

Poland

Phone: +48 12 44 66 998

e-mail: [email protected]

This manual includes two types of designation, which you 

should pay special attention to. They indicate warnings or 

other information which may be crucial for health and life 

of the user or other people. You should read them with 

special attention:

PRE-USE GUIDELINES

IMPORTANT!

DANGER

INDICATES AN IMMINENTLY HAzARDOUS SITU-

ATION WHICH, IF NOT AVOIDED, WILL RESULT IN  

A SERIOUS ACCIDENT WHICH MAY CAUSE DEATH 

OR SERIOUS INJURY.

WARNING

INDICATES A POTENTIALLY HAzARDOUS SITU-

ATION WHICH, IF NOT AVOIDED, COULD CAUSE 

DAMAGE TO THE PRODUCT OR SERIOUS INJURY. 

IT MAY ALSO INDICATE WRONG AND  

DANGEROUS PRACTICES.

6

7

Содержание NX Series





















Отзывы: