Pg. 26
v.1.1
7.4.3
Control Check
A control check should be performed during the periodic inspection
1.
Remove the propellers
2.
Power on transmitter
3.
Install battery and connect power
4.
Arm the motors
5.
Slowly increase the throttle until the motors begin spinning
6.
Test each control input and check that the motors respond as shown in the table below
Control Input
Left Wing
Motor
Top Pylon
Motor
Bottom Pylon
Motor
Right Wing
Motor
Elevator forward
=
faster
slower
=
Elevator backward
=
slower
faster
=
Aileron right
faster
=
=
slower
Aileron left
slower
=
=
faster
Rudder right
faster
slower
slower
faster
Rudder left
slower
faster
faster
slower
7.
Disarm the motors
8.
Disconnect battery
9.
Power off transmitter
WARNING: Remove propellers before arming