manualshive.com logo in svg

XCMG SQ10SK3Q, Руководство по эксплуатации и обслуживанию

Поделиться
Скачать
XCMG SQ10SK3Q Скачать руководство пользователя страница 32

徐州徐工随车起重机有限公司

 

 

- 32 - 

WARMING

: Use grease with characteristics comparable to those specified in the lubrication 

chart in this Section.

 

   

H.04 Checking the oil level in the tank 

When the crane at close status completely

，

check on the level indicator that the oil reaches 

the position marked “A” in the illustration. 

A: Maximum oil level

 

 

 

 

H.05 Replace the oil     

configure the crane at close status completely, find a container big enough to fill the oil in the 
tank and place it under the tank, then open the plug in the bottom of the tank to exhaust the oil, 
recover the plug and make sure tightness. 

CAUTION

：

Take suitable precautions to prevent the risk of burns due to contact with hot 

oil.   

 

 

WARNING

：

Always use oil with the same characteristics as those specified in Section 

“H.11”.inject the fresh oil into the tank with filter cartridge and recover the tank top.   

 

 

H.06 Replacing the oil filter   

            The filter must be replaced at the specified intervals and whenever the optical indicator 

shows that the filter is clogged. 

CAUTION

：

Take suitable precautions to prevent the risk of burns due to contact with hot oil. 

Open the filter cover, Replace the filter with one that has the same filtration mesh, clean it 

with a nitrate-based solvent, grease and check the position of seal between cover and 
filter body, then recover the filter cover

 

 

 

H.07 Checking wear on sliding pads 

      You must check the wear on the sliding pads between the boom extensions at the 

specified intervals. 

Excessive wear on the pads may cause the friction among the metal parts, the 

Содержание SQ10SK3Q





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды