XCM MaxRace F-1 V.5, Руководство по эксплуатации

Страница: 7 / 8

2.Press the button on the PS 4 controller , the digit tube blinks,
3.Press the button again, the digit tube turns off, the button on the racing
wheel has its default function restored.
To set all buttons back to their original functions:
Press and hold the "P" switch for 3 second
s,
the digit tube shows and blinks,
release the P button and all the buttons will return to their original functions.
(3) Regarding to different racing games and different kinds of shifter gear setting,
adjust the shifter gear digit number on MaxRace F-1 v.5 (s or -) to match the
gear position of the game before playing or resuming the game.
(4) After connecting the MaxRace F-1 v.5 to the Logitech™
G25/G27 racing wheel,
the default setting is set on manual control, use the gear shift (+ or -) to control the
shifter gear.(Push upward for a higher gear level, push downward for a lower gear
level), the steps are shown below:
Press and hold the M button on MaxRace F-1 v.5 for 3 seconds, wait until the digit
tube shows and blinks, now release the M button, the setting is completed. The
mode changes from manual control to + and – mode control.
Press and hold the M button on the device for 3 seconds, wait the digit tube
shows and blinks, release the M button, the setting is completed. The gear
shifter changes from + and – mode control to manual control.
MaxRace F-1 v.5 firmware can be upgraded via PC. More information can be found