XciteRC X-pert Charger X50, Руководство пользователя

Страница: 19 / 34

19
X-pert Charger X50
EN
Specifications
·
Error messages and their meanings
Error messages and their meanings
Reversed polarity of the battery. Check and retry.
No battery connected or disconnected during
charge.
DC input voltage below 11 V or exceeds 15 V
(DC mode )
Charger error. Disconnect the battery, remove the
charger from the power supply.
Die Spannung des angeschlossenen
Akkus ist niedriger/höher als am Ladegerät
eingestellt. Überprüfen Sie die eingestellte
Zellenzahl.
Balance voltage error. Check the balancer connector.
Safety timer has expired. Disconnect the battery and
retry.
Batetry fully charged.
Err.1
Err.2
Err.3
Err.4
Err.5
Err.6
Err.7
Err.8
StOP
FULL
Calibration error of the charger. Disconnect and
retry.
Bad contact. Check the charging wires and retry.
Specifications
Input voltage AC 100-240 V AC
Input voltage DC 11 - 18 V DC
Power max. 50 W
Weight approx. 295 g (without power cord)
Dimensions approx. 135 x 112 x 60 mm
Battery type 1-15S NiMH (1.2 - 18 V)
1-6S Lithium (3.3 - 25.2 V)
1-10S Pb (2 - 20 V)
Charging current 0.1 - 5 A
Max. Battery capacity 100 - 9999 mAh
Cut-off NiMH/NiCd: Delta-Peak
Lithium, Pb: CC/CV
Safety timer 180 min. (factory setting)
Delta-Peak sensivity NiCd: 8 mV, NiMH: 5 mV
Balancer accurancy 5 mV / cell