XciteRC X-6S, Руководство пользователя

Страница: 46 / 80

46 50500000 Sender X-6S
F U N . M E N U
T H R O . C U R V
M O N I T O R
P I T . C U R V
P I T . C U R V
I D L E 0
I 2 0
O 2 0
H 0
P I T . C U R V
I D L E 1
I 2 0
O 2 0
H 7 5
P I T . C U R V
N O R
I 0
O 0
L 0
IDLE SW
NOR/POS0/
POS1
IDLE SW
ENTER
345
F U N . M E N U
T H R O . H O L D
T H R O . H O L D
S W O N
V A L U E - 2 0
TH HOLD
POS0/POS1
TH HOLD
ENTER
345
EN
Function menu
Pit curve
Pitch curve
• Press “up” to select ‘FUNMENU’
and press “ENTER” to come to
the interface.
• Press “up” or “down” to select
“PIT CURV” ,and now the shad-
ow area is the item that can be
set currently. Press “ENTER” to
go to the next step.
• Press “up” or “down” to select the pitch curve point. There are 5 points, they are L, 1, 2, 3, H. Press INC
or “DEC” to set the corresponding value separately, and the pitch curve will change accordingly.
• There are three pitch curves to be selected, normal, “IDLEO” and “IDLE1” by the switch at the left top of
the transmitter.
• After you setting,press “EXIT” to save the setting and leave the operation.
Remark: the transmitter can save 3 groups of different pitch curves. When you fly 3D, please ask for instruc-
tion from experienced pilots.
Thro.hold
Throttle hold
• Press “up” to select ‘FUNMENU’ and press “ENTER” to come to the interface.
• Press “up” or “down” to select ‘THRO HOLD’ ,and now the shadow area is the item that can be set cur-
rently. Press “ENTER” to go to the next step.
• Set the “TH HOLD” switch at the top of the transmitter. When “TH.HOLD” is in ‘0’ position, LCD show SW
“OFF”; When “TH.HOLD” is in ‘1 ‘ position, LCD show SW “ON” .
• Press INC or “DEC” to set the corresponding value separately,
• After your setting, press “EXIT” to save the setting and leave the operation.