![XciteRC RX31 Скачать руководство пользователя страница 14](http://html.mh-extra.com/html/xciterc/rx31/rx31_user-manual_882097014.webp)
14
51000004/0002/0003 Empfänger RX3I, RX5I, RX7I
EN
Getting started
Compatibility
The receiver only works with transmitters of Xcite RC.
XciteRC-Transmitter-Compatibility
Transmitter
Order-number
Receiver
Car RX3I
RX7I
51000004
51000002
XRC-6s
50500000
x
XRC-4s
50300000
x
XRC-6Si
50501000
x
XRC-3i FHSS
50200000
x
XRC-3i LCD FHSS Prospec 50201000
x
Modul XRC-M6i
50600000
x
x
Binding procedure
So that the receiver always works with only one transmitter, the receiver must be bound to the transmitter
before use.
Binding:
Switch on the transmitter, reduce throttle to its lowest position and make sure the alarm is off when powering
on the receiver/aircraft. Press the bind button (if applicable) until the green light turns, solid, signaling binding
success.
Caution:
While binding, place the transmitter and receiver antennas in close proximity if possible; make sure that there
are no similar devices on bind mode within approximately 10 meters. If the light flashes after the binding
procedure is complete, retry the binding procedure again until the light turns solid.
Wiring diagram
RX5I
Battery
3. Channel
2. Channel
1. Channel