19
13000000 XciteRC Flybarless Trainer 200
13000000 XciteRC Flybarless Trainer 200
EN
Troubleshooting
Problem
Possible cause
Solution
Main rotor blades are shaking in
flying.
Lateral axis is bent; lateral axis
screw is not tight. There are
some debris in the servo, caus-
ing shakes, The loose between
the swash plates. Deformed or
damaged tail rotor blades.
Replace the lateral axis. Tighten
the lateral axis screw. Change
the bearing. Remove he servo
and clear debris. Compress the
swash plates. Change tail rotor
blades.
Helicopter is out of control when
it takes off.
The helicopter isn´t maintained
static level when it is binding.
Rebind the TX and RX correctly.
The sound of the main rotor be-
comes smaller.
Low battery voltage of helicopter. Charge the battery or change a
fully charged battery.
Helicopter has no reaction or can
not fly smoothly.
Failure to binding.
Rebind the helicopter and trans-
mitter, make sure you place the
helicopter static level next to the
transmitter.
Receive board Interface Diagram
Tail Motor
Main motor
Aileron
Elevator
13000000-Flybarless-Trainer-200-Anleitung.indd 19
24.10.2013 14:26:54
