11
(1)
Set Tig/MMA selector
switch to MMA
(2)
Connect earth
lead
to
(2)
Connect the electrode
lead to
Installation set up for MMA (Stick) Welding with Razor ARC180/ARC200
(1)
Turn the power source on and select the
MMA
function with the Tig/MMA selector switch.
(2)
Connection of Output Cables:
Various electrodes require a different polarity for optimum results
refer to the electrode manufacturers information for the correct polarity. Most GP electrodes are
Electrode connected to output socket, Earth Connected to the output socket
(3)
Set the welding current relevant to the electrode type and size being used as recommended by the
electrode manufacturer.
(4)
Place the electrode into the electrode holder and clamp tight
(5)
Strike the electrode on the work to create the arc and hold the electrode steady to maintain the arc
(6)
Hold the electrode slightly above the work piece to maintain the arc while travelling at an even speed
to create and even weld deposition
(7)
To finish the weld, break the arc by quickly snapping the electrode away from the work piece.
(8)
Wait for the weld to cool and carefully chip away the slag to reveal the weld metal underneath
4)
Place the electrode into the electrode
holder and clamp tight.
5)
Strike the electrode against the work
piece to create and arc and hold the elec-
trode steady to maintain the arc
6)
Hold the electrode slightly above the
work maintaining the arc while travelling
at an even speed.
7)
To finish the weld, break the arc by
quickly snapping the electrode away from
the work piece.
8)
Wait for the weld to cool and carefully
chip away the slag to reveal the weld
metal below.
(3)
Set the welding current using
the amperage control dial
MMA (Stick) Operation:
Razor
Weld
ARC
18O
ARC
2OO
Содержание Razor Weld ARC180
Страница 28: ...28 New Zealand Limited RazorWeld RazorCut ...
