Xcel-Arc Razor Cut45, Руководство по эксплуатации

Страница: 8 / 20

8
RAZOR CUT45 PLASMA
45 Amp Inverter Plasma Cutter
Cuts: Steels, Stainless, Cast Iron, Brass, Copper. Aluminium
Optional machine accessories available - refer www.xcelarc.nz
XA-CUT45RZ
Standard Package
Product Code:
XA-CUT45RZ-K
Standard Package includes: RAZOR CUT45 Machine, SC80 Plasma Torch 6m, Earth Lead & Spares Kit
Overview
The RAZOR CUT45 is a high quality industrial-rated 230V single phase inverter Plasma Cutting machine produced using the latest in
IGBT inverter technology. Designed for maximum cutting capacity and performance from single-phase power, this machine is reliable,
robust and stacked with features. The RAZOR CUT45 produces a high temperature plasma stream providing effortless cutting of all elec -
trically conductive materials including steel, cast Iron, stainless steel, copper, aluminium, brass, etc. The machine is supplied with a high
quality Suregrip SC80 6mtr Plasma Torch with Euro Style connection, developed specifically to enhance and improve the cut quality of the
RAZOR CUT45 machine. The SC80 Plasma Torch provides effortless starting of the cut with powerful, fast and accurate stand-off cutting
with drag cutting capability. The SC80 Plasma Torch uses low-cost wear consumables with the additional benefit of longer life cycle of both
Electrodes and Cutting Tips. The RAZOR CUT45 is an exceptional machine that is well suited to a wide range of applications including
light industrial and general engineering, forestry and agriculture, sheet metal fabrication, site work, transport and marine repair, general
demolition and maintenance work. The RAZOR CUT45 provides great portability, with plenty of cutting power to get the job done with
outstanding speed and a great finish. Built to our specification and manufactured in compliance to AS/NZ60974-1
Features
■
Proven IGBT inverter technology
■
Light Industrial application
■
Outstanding performance from single-phase
■
Pilot Arc Ignition (non-contact)
■
Stand-off cutting with drag cut capability
■
Maximum sever cutting thickness (steel) 20mm
■
High quality Surecut SC80 Plasma Torch 6mtr
■
Euro Style torch connection, low-cost consumables
■
Integral pre-set air regulator, self-drain type
■
Suitable to cut all electrically conductive materials
■
Lightweight & compact design
■
Strong metal housing with plastic front & rear panels
■
Generator compatible (recommend 6KVA minimum)
■
Tolerant to variable power supply
45Amp 230V Inverter Plasma Cutter
16mm Cut on Mild Steel, Lightweight & Portable
Industrial Rated with Power Factor Correction
RAZOR CUT45 RAZOR CUT45
Technical Data
Power Supply / Phases (V-Ph) 230V - 1 +/- 10%
Rated Input Power 5.50 kVA
I i
eff
as per AS/NZ60974-1
15.0 Amps
I Max 29.2 Amps
Plasma Cut Current Range 20-45 Amps
Duty Cycle @ 40°C
as per AS/NZ60974-1
25% @ 45Amps
Duty Cycle @ 25°C
(approximate)
55% @ 45Amps
No Load Voltage 98V
Plasma Arc Start Pilot Arc
Air Flow Draw Off 6.7 cfm
Air Pressure 75 psi
Steel Cut Thickness 16mm
Steel Sever Thickness 20mm
Aluminium Cut Thickness 8mm
Aluminium Sever Thickness 10mm
Stainless Cut Thickness 8mm
Stainless Sever Thickness 10mm
Insulation Class F
Protection Class IP21S
Dimensions
(LxWxH)
410x165x330mm
Weight Power Source 9.8kg
Certification Approval AS/NZ60974-1