User Manual XC Tracer Mini V
Rev 01 2.9.2022
Adjusting The Volume
XC Tracer Mini V has 5 volume settings: Silent, quiet, gentle, medium and loud. You can change the
volume setting with a short push of the red button, always from mute
–
gentle - medium
–
loud
–
mute
–
quiet etc.
XC Tracer Mini V Configuration File
Connect XC Tracer Mini V to a computer using a Micro USB Cable and once connected, switch the
device on by briefly pressing the red button until you hear a beep-beep-beep. XC Tracer Mini V is
now running in USB-MSD (Mass Storage Device) mode. XC Tracer Mini V
’s
internal Micro SD Card
will appear as an external drive in Windows Explorer or the Mac Finder. You will find a PDF copy of
the user manual on the SD card, and also the XC_Tracer_Mini_V.txt configuration file. Editing this
file in Notepad (Windows) or Text Editor (Mac) allows you to adjust XC Tracer Mini V
’s
settings. The
various options are described below:
# XC Tracer Mini V configuration File
VarioSerialNumber=98D27963B197
Serial number of XC Tracer Mini V, is used for the IGC logger.
VarioFirmwareVersion=XC_Tracer_Mini_V_R01
Indicates the device’s firmware version.
RadioFirmwareVersion=7.07-0.9.54
Indicates the firmare version of the radio module / FLARM / FANET
RadioExpireDate=20231201
Indicates the expiry date of the radio firmware.
RadioID=200037
This is the Radio ID / Fanet ID / Flarm ID
reset=no
Setting
reset=yes resets XC Tracer Mini V to the factory default settings. Reset=no is the default
setting. After a reset reset=no will automatically be set in the config file.
# supported protocols are None, XCTRACER, XCTRACERW, LK8EX1, LXWP0 or LXWPW
Select the BLE protocol her. NB. Only one protocol can be selected at once. Please check at
which protocol to choose for your app. LXWPW is the same as LXWP0, but
with the information of the calculated wind.
stringToSend=LXWP0
In this case the LXWPO protocol will be will be used.
# name of BLE service
