en
gl
is
h
7
en
gli
sh
8
To move the clamp to another location,
pull the quick-release lever, loosen the
screw, and slide the clamp off the table.
attachtheracingWheeltotheclamp
To attach the racing wheel to the table
clamp, angle it toward you so that the guide
pins on the clamp fi t into the corresponding
sockets on the base of the racing wheel.
Take care not to pinch your fi ngers.
Once aligned, press down on the back of
the racing wheel until it clicks into place.
To release the racing wheel from
the clamp, press the release button
and lift the racing wheel from the
clamp’s guide pins, back-end fi rst.
connecttoPower
To connect the racing wheel to power,
either connect the AC power supply to a
standard wall outlet, or insert batteries
(provided). While connected to AC
power, your racing wheel will continue
to use wireless signals for gameplay.
Connect to power by completely inserting
the power supply cord into the power input
on the back of the racing wheel until it
stops. Connect the AC power cord into the
power supply until it stops, then connect
the power cord to a standard wall outlet.
insertbatteries
electricalsafety
As with many other electrical devices, failure to take the following precautions can result in
serious injury or death from electric shock or fi re or damage to the racing wheel.
If you use AC power, select an appropriate power source:
• The racing wheel’s power input is 24V DC @ 1A. Use only the power supply and AC power
cord that came with your racing wheel or that you received from an authorized repair
center.
• Do not use nonstandard power sources, such as generators or inverters, even if the
voltage and frequency appear acceptable. Only use AC power provided by a standard wall
outlet.
To avoid damaging the AC power cord:
• Protect the cord from being pinched or sharply bent, particularly where it connects to the
power outlet and the racing wheel.
• Do not jerk, knot, sharply bend, or otherwise abuse the power cord.
• Do not expose the power cord to sources of heat.
• When disconnecting the power cord or power supply, pull on the plug—do not pull on
the cord.
If the power cord becomes damaged in any way, stop using it immediately and contact Xbox
Customer Support for a replacement.
Unplug your racing wheel’s power cord during lightning storms or when unused for long
periods of time.
electricalsafety
As with many other electrical devices, failure to take the following precautions can result in
serious injury or death from electric shock or fi re or damage to the racing wheel.
If you use AC power, select an appropriate power source:
• The racing wheel’s power input is 24V DC @ 1A. Use only the power supply and AC power
cord that came with your racing wheel or that you received from an authorized repair
center.
• Do not use nonstandard power sources, such as generators or inverters, even if the
voltage and frequency appear acceptable. Only use AC power provided by a standard wall
outlet.
To avoid damaging the AC power cord:
• Protect the cord from being pinched or sharply bent, particularly where it connects to the
power outlet and the racing wheel.
• Do not jerk, knot, sharply bend, or otherwise abuse the power cord.
• Do not expose the power cord to sources of heat.
• When disconnecting the power cord or power supply, pull on the plug—do not pull on
the cord.
If the power cord becomes damaged in any way, stop using it immediately and contact Xbox
Customer Support for a replacement.
Unplug your racing wheel’s power cord during lightning storms or when unused for long
periods of time.
Disposablebatterysafety
Improper use of batteries may result in battery fl uid leakage, overheating, or explosion. Risk
of fi re if batteries are replaced by an incorrect type. Released battery fl uid is corrosive and
may be toxic. It can cause skin and eye burns, and is harmful if swallowed. To reduce the
risk of injury:
• Keep batteries out of reach of children.
• Do not heat, open, puncture, mutilate, or dispose of batteries in fi re.
• Use only alkaline batteries, type AA (LR6).
• Do not mix new and old batteries.
• Remove the batteries if they are worn out or before storing your racing wheel for an
extended period of time. Do not leave batteries in the AA battery pack when it is not
installed in the racing wheel.
• If a battery leaks, remove all batteries, taking care to keep the leaked fl uid from touching
your skin or clothes. If fl uid from the battery comes into contact with skin or clothes,
fl ush skin with water immediately. Before inserting new batteries, thoroughly clean the
battery compartment with a damp paper towel, or follow the battery manufacturer’s
recommendations for cleanup.
• Dispose of batteries in accordance with local and national disposal regulations (if any).
Disposablebatterysafety
Improper use of batteries may result in battery fl uid leakage, overheating, or explosion. Risk
of fi re if batteries are replaced by an incorrect type. Released battery fl uid is corrosive and
may be toxic. It can cause skin and eye burns, and is harmful if swallowed. To reduce the
risk of injury:
• Keep batteries out of reach of children.
• Do not heat, open, puncture, mutilate, or dispose of batteries in fi re.
• Use only alkaline batteries, type AA (LR6).
• Do not mix new and old batteries.
• Remove the batteries if they are worn out or before storing your racing wheel for an
extended period of time. Do not leave batteries in the AA battery pack when it is not
installed in the racing wheel.
• If a battery leaks, remove all batteries, taking care to keep the leaked fl uid from touching
your skin or clothes. If fl uid from the battery comes into contact with skin or clothes,
fl ush skin with water immediately. Before inserting new batteries, thoroughly clean the
battery compartment with a damp paper towel, or follow the battery manufacturer’s
recommendations for cleanup.
• Dispose of batteries in accordance with local and national disposal regulations (if any).
X123543701bdy_ENU_m1.indd 7-8
7/27/06 8:55:30 AM
