19
After mechanical adjustment of the FunkySwitch
TM
you need
to make sure that the arrow is located on the top side. If this is
not the case you can loosen the small worm screws and turn
the FunkySwitch
TM
.
The button boxes can be mounted to short or long levers and on each of the
three sides of the button box.
When the button boxes are adjusted to your favourite positions and orientation
you can pull off the button caps from the buttons and re-attach them onto the
buttons well orientated and aligned.
Electrical
The FunkySwitch
TM
needs to be plugged in at long socket labeled (ENCOD
-
ER1). Connect the plug of the button box cable to any of the remaining 5 plugs
on the PCB labeled BUT_2 to BUT_6.